Operation - Unold 18040 Instrucciones De Uso

DE
10. Switch on the kettle by pressing the ON/OFF switch downwards into the
„I"-position. The kettle cannot be switched on if it is not properly seated on
EN
the base.
11. When the water boils, the appliance automatically shuts off.
FR
12. For hygienic reasons, please discard the water from the first boiling.
NL

OPERATION

IT
ES
PL
4. CAUTION!
If the kettle is overfilled, boiling water may be ejected!
5. Close the lid until it clicks into place. The locking prevents accidental open-
ing.
6. Place the kettle level on the base in order to establish the contact with the
power connection.
7. Switch on the kettle by pressing the ON/OFF switch downwards into the
„I"-position. The kettle cannot be switched on if it is not properly seated on
the base.
8. Whenever you take the kettle off the base, the appliance is automatically
switched off, even if the water is not yet boiling.
9. The kettle automatically stops heating at the latest when the water boils.
10. ATTENTION:
The automatic switch-off only works, if the lid is correctly closed.
11. Of course you may also push the switch into the „O"-position to interrupt
heating.
12. CAUTION!
Ensure that the kettle is switched off before removing it from the base.
13. Please allow the product to cool down for a certain time before using the
kettle again to heat water.
14. The kettle is fitted with a dry-operation cutout that switches off the heating
elements when they become too hot, for instance when the kettle has boiled
18 von 56
Copyright UNOLD AG | www.unold.de
1. Remove the kettle from the base.
2. Press the opening button on top of the handle. The lid
is released and can be open.
3. Fill the kettle with water (minimum 0.5 litres, mark
MIN, maximum 1.5 litres, mark MAX).
Stand 19.2.2020