Basic Operation; Dehumidification Mode - AERMEC EXC Manual De Uso

BASIC OPERATION

TIPS ABOUT THE AUTOMATIC MODE
In AUTOMATIC mode, the temperature setting and
mode are automatically selected according to the room
temperature when the unit is turned on.
Modes and temperature settings
Automatic operation
Room Mode
temperature
at start
Below HEAT-
21°C
From 21°C DEHUMIDIFICA-
to 24°C TION
From 24°C COOL-
to 26°C
From 26°C COOL-
to 28°C
Above COOL-
28°C
16
Temperature
setting
23°C
ING
Room temperature
at start
24°C
ING
25°C
ING
26°C
ING
Press the MODE button to select the operation
1
mode.
AUTOMATIC
HEATING
2
Press the ON/OFF button to switch on the unit.
2
The red indicator light on the unit will light up.
5
3
Press the TEMP. button to set the desired
1
3
temperature.
4

DEHUMIDIFICATION MODE

The temperature can be changed in increments of
1°C within the range of 2°C higher to 2°C lower than
the temperature automatically determined by the air
conditioner.
The temperature can be set within the range 18 - 32°C.
Press the FAN button to set the desired fan speed.
4
AUTOMATIC
In the DEHUMIDIFICATION mode, the fan speed is
pre-set to AUTOMATIC and cannot be changed.
To switch off the unit, press the ON/OFF button
5
again.
The red indicator light on the unit will switch off.
DEHUMIDIFI-
COOLING
AUTOMATIC/
COOLING/
HEATING MODE
SOFT LOW
CATION
HIGH