AERMEC EXC Manual De Uso página 21

ECA / FCA-R
MAKE SURE THAT AIR FLOW IS DIRECTED CORRECTLY (GLA-R)
During summer operation, the cold air flow from the appliance should never be directed towards the occupants of the room.
Also during heating operation, direct currents of air (even though the relative temperature is higher than room temperature) can
cause a sensation of cold with consequent discomfort.
Position of the fins in heating operation, opening 20°.
Position of the fins in cooling operation, opening 10°.
When the fins are closed ventilation is permitted.
INDICATIONS AND CONTROL BUTTONS
AUXILIARY COMMANDS ON THE UNIT
A - YELLOW TIMER LED
Switches on when the timer is activated.
B - "AUX" BUTTON (AUXILIARY COMMANDS)
Used when the remote control is out of order.
It allows the switching on in AUTO mode only, and the
switching off of the conditioner.
In AUTO mode the microprocessor, when starting up, based
upon the room temperature, selects the type of function and
stabilises the room temperature to be maintained as well as the
fan speed.
C - RED OPERATION LED
This comes on when the unit is working in heating mode.
C - BLUE OPERATION LED
This comes on when the unit is working in cooling mode.
D - RECEIVER
Receives the signals from the remote control.
VISUALISATIONS
Indicator lights • LEDs
A C C
Yellow Red Blue
❍ ❍ ❍
● ❍ ❍
❍ ❍ ●
❍ ● ❍
● ❍ ●
● ● ❍
● = On
❍ = Off
Operation mode
Off
Stand by (unit off, timer active with automatic starting facility set)
Unit on, in cooling or dehumidification mode
Unit on, in heating mode
Unit on, in cooling or dehumidification mode (timer active awaiting automatic power down)
Unit on, in heating mode (timer active awaiting automatic power down)
B
A
C
D
21