AERMEC EXC Manual De Uso página 20

TL3
COMMAND EQUIPMENT
The command equipment consists of a remote control and an
infrared signal receiver to be flush-mounted in the wall.
The receiver has an 8m cable for connection to the inner unit,
a unified rectangular box of 3 modules, type 503 (only one
of which is occupied by the receiver, while the others are
available for other uses) and a white covering plate.
For the installation of the second TL3, connect the second
receiver to the first, in parallel, with the 8m cable supplied.
Avoid installing the receiver in positions where it is directly
exposed to sunlight.
1 ROSSO-RED-ROUGE-ROT
2 BLU-BLUE-BLEU-BLAU
3 MARRONE-BROWN-MARRON-BRAUN
4 GIALLO-YELLOW-
5 BIANCO-WHITE-BLANC-WEISS
6 NERO-BLACK-NOIR-SCHWARZ
ELECTRICAL CONNECTIONS TL3
1 2
20
3 4
5 6
"AUX" BUTTON (AUXILIARY COMMANDS)
Used when the remote control is out of order.
It allows the switching on in AUTO mode only, and the
switching off of the conditioner.
In AUTO mode the microprocessor, when starting up, based
upon the room temperature, selects the type of function and
stabilises the room temperature to be maintained as well as the
fan speed.
1 = Red
2 = Blue
3 = Brown
4 = Yellow
5 = White
6 = Black
UI
For further information consult the EXC manuals.
SC