Replacing The Batteries; Maintenance Tips For Retailers; Storage / Shipping - B+B Centuro S7 Manual De Instrucciones

Centuro S7
| Scooter

6.3.2. Replacing the batteries

Be very careful when working on the batteries. Do not use metal tools,
do not touch the battery terminals and ensure that you follow the
battery manufacturer's instructions.
Only use batteries that are approved for this scooter (see Technical
data).
Make sure that the scooter is switched off before starting to replace the
batteries. (See also Section 4.7 - Disassembling for storage).
• The batteries are located underneath the seat of the scooter and
are protected by the housing cover.
• Start by removing the housing cover (Fig 41).
• - Disconnect the plug connections carefully and without using force.
• Undo the screw on the mounting bracket.
• Now remove the batteries (Fig. 43).
• Lift the new batteries into the space provided and connect the
contacts. Make sure to observe the correct colour-coding (red and
black, Fig. 42).
• Reattach the housing cover and the seat.
66
Caution! This work should only be done by a trained
technician. There is danger of fatal injury!
When the batteries have reached the end of their
life, i.e. cannot be sufficiently charged any more,
they must not be disposed of with the household
waste. When new batteries are purchased, the mo-
bility dealer takes the old batteries and disposes of
them correctly.

7. Maintenance tips for retailers

We recommend having a complete inspection of the scooter carried out
regularly by a qualified mobility dealer. If the scooter develops any
faults or defects, it must be taken to the mobility dealer immediately for
repair. The information, documentation and circuit diagrams required
for repair and maintenance shall be supplied to the mobility dealer
on request. A training programme is available for mobility dealers.
If you have questions, you can contact the B+B customer service by
telephoning +49 (0)700/6000 7070.

8. Storage / Shipping

If the scooter is to be stored or shipped, all attachable and unsecured
parts must be removed and packed individually in appropriate cartons.
The individually packed parts can then be packaged together in a larger
carton. We recommend keeping the original packaging and storing it
with these purposes in mind so that it is available if required. Your
scooter then has optimum protection against environmental influences
during storage or transport.
Bischoff & Bischoff GmbH |21.07.2020 - revision 3
Centuro S7
Scooter |
67