Dru 55MF Instrucciones De Instalacion Y Uso página 34

Cast iron inner plates protect the
combustion chamber and dissipate heat to
the surroundings.
5
6
4
3
Removable internal parts
1 rear inner plate
2 grid holder
3 fire basket
4 inner plate on the left and right side
5 baffle plate
6 grate
7 ash pan
Connecting to the back
1. Apply supplied glass fibre sealing tape (2)
measuring 10 x 3 mm to the contact surface of the
connection collar (8).
2. Remove the protection plate from the back shield
with the assistance of a screwdriver; see following
figure.
10
1 1
4
7 2
09.20020.041
3. Remove the cover (1) from the back wall.
4. Install the connection collar to the back wall with
the materials.
5. Install the cover in the top plate using the
mounting bracket (4).
1
2
3
4
5
6
Connecting to the top
On delivery, the connection at the rear is closed, so
that a back cover does not need to be installed.
Because of the distance to the (combustible) wall,
the protection plate in the back shield may not be
removed.
1. Apply supplied glass fibre sealing tape (3)
measuring 10 x 3 mm to the contact surface of the
connection collar (2).
2. Affix the connection collar to the top plate with the
materials supplied.
Subject to change because of technical improvements
7 2 8
10
9
09-20021-057