Connecting An Electric Latch Or Lock; Using The Videophone; Controls On The Videophone; Technical Specifications - Extel Luka Instrucciones De Uso

Ocultar thumbs Ver también para Luka:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
b. Connecting an electric latch or lock
Connect the lock directly to terminals 5 and 6 on the back of the video camera (no colour coding).
Note that this function is only available when the screen is displaying the video from out-
side.
Important:
The strike plate or electric lock that you are about to install must have a mechanical memory, like
all EXTEL products. For wiring, see the label on the back of the camera.
c. Connecting a gate motor
Directly connect to contacts 3 and 4 on the back of the camera. The camera delivers a "dry" contact with no cur-
rent, to be connected to the "push button" control of your automatic opener.
Note that this function is only available when the screen is displaying the video from out-
side.
6. USING
a. Using the videophone
• Pressing the button on the street unit triggers an audible alarm and switches on the monitor for approximately
30 seconds. When the visitor has been identified, press the
Note:
The
button only needs pressing once to communicate with the street unit.
• When the conversation is finished, wait for the end of the time-out (approximately 2 min) or press the
to turn the monitor off.
• Prolonging the image :
To prolong the image a further 60 seconds, press the
• Activating a latch:
The latch or lock is activated when the
• Activating an automatic control:
To activate an automatic control, press the
It should be noted that the opening functions are only valid when the screen is switched on.
The image disappears briefly when the command is transmitted.
b. Controls on the videophone
4 controls are located on the side of the monitor:
• Melody select (12) confirm with
• Melody volume control (15)
• Colour control (14)
• Brightness control (13)

7. TECHNICAL SPECIFICATIONS

a. Monitor
(MN MIKA)
• Reference : 810215
• Power supply: 17 V
• Power consumption: 6,8 W
• Screen: 7" - 18 cm
• Resolution : 480 x 234
• Measurements (mm): 130 x 210 x 20
GB4
(fig. 6)
( g. 6)
button.
button is pressed.
button.
( g.2)
a. Monitor
• Reference : 810214
• Power supply: 17 V
• Power consumption: 4,25 W
• Screen: 4" - 10 cm
• Resolution : 320 x 240
• Measurements (mm): 153 x 123 x 16
CFI EXTEL LUKA / MIKA - 10/2015
button to talk.
(MN LUKA)
button

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

MikaJs-v440n2Js-v741n2

Tabla de contenido