PREPARATION
ASSEMBLY INSTRUCTIONS
6
K
J
Locking Spray Gun (before Lance installation)
To lock the trigger of the spray gun (J), aim the gun
away from you and push the lock button from right to
left. After doing so, squeeze or pull the trigger to make
sure it is locked and will not move. Always leave lock
button in locked position when not in use. This ensures
the gun is in "safe" mode until it is ready for use.
8
Garden Hose Adapter Installation
Remove plastic shipping cover on water inlet on front
right side of power washer unit (A). Install clear quick
connect (H) to water inlet by hand, tightening clockwise.
8
Lock
J
Unlock
A
H
7
I
H
igh/Low Nozzle Lance and Turbo Nozzle Lance
Installation
While the spray gun (J) is in the locked position, insert
the high/low nozzle lance (F) or turbo nozzle lance (I)
into the end of the spray gun, by inserting and pushing
together turning clockwise simultaneously. To remove,
push together and turn counterclockwise.
Note: Always push the safety lock button to lock the
trigger when changing lances to ensure that they do not
accidentally eject with force during removal.
Note: When using the turbo lance, make sure the turbo
nozzle is screwed on tight at the end of the lance each
time you use it.
F
I
J