Radio control:
The hoods with the standard remote control are already configured.
For optional and/or replacement remote controls it is necessary to start the learn-
ing process.
With the hood turned off, keep button "ON/OFF" for 5sec. The remote control learning
is indicated with the flashing alarm filters led. If within one minute arrive a valid
remote control code (sent by pressing any button of the remote control ) the led will
be on continuously for 3 seconds and then it will turn off, indicating the proper learn-
ing.
REMOTE CONTROL BUTTONS
> One button for turning the lights on and off.
RAFFAELLO - OTELLO SOLE: hold the button to dim the light.
> One button for turning on at 2nd speed and for turning the motor off.
> Two buttons + and - for increasing and decreasing the motor speed. At the 4th
motor speed (intense) the led flashes and after 5 minutes the 2nd speed is automati-
cally set.
> A TIMER button for turning the motor off after 10 minutes.
USE AND MAINTENANCE
Before beginning any sort of cleaning or maintenance work, turn power off to the hood by turning the main
switch to 0 (OFF).
Changing the light bulbs
LED spotlight replacement should only be carried out by qualified technicians using only original spare parts.
Cleaning the metal filters:
The metal filters fitted in the hood should be washed every 2-3 months, depending on how much the hood is used,
using hot water and a liquid detergent that is not too aggressive. The metal filters can be removed by the special
handle, unhooking the front part of the filter and pulling it downwards
EN - 7