Steren CAU-275 Manual De Instrucciones página 21

Adjust the temperature
1. Turn the station on. In the
display appears the grades in red,
and unit measure in blue.
°C/°F
3. Rotate the control temperature
knob until desired temperature.
Calibration
You don't need to calibrate the equipment before fi rst use; however,
you should calibrate it after to change the tip or the heating element.
1. Connect the soldering to the DIN connector.
2- Rotate the control knob until 400°C (750 °F) and turn on the station.
2. Press the unit change button to
select between °C or °F grades.
400
c
Lo Hi
21