Steren CAU-275 Manual De Instrucciones página 25

Troubleshooting
The equipment does not turn
The equipment turn on, but the tip
doesn't heat
The solder is not sticks to the tip
The tip's temperature is very low
Specifi cations
Input: 120 V~ 60 Hz 60 W
Nominal consumption: 55 W/h
Stand-by power consumption: not applicable
.
• Verify that the power cord it is
connected or not is damaged.
• Check that the fuse is not molten, if
so, replace it.
• Verify that the soldering it is connec-
ted to the station.
• Verify that the soldering cable is not
damaged.
• Confi rm that the heating element is
not broken.
• Check that the temperature is the
adequate.
• Verify that the tip it is clean.
• Verify that the tip don't have oxide.
• Check the calibration of the
temperature.
25