Function Modes - Astralpool 32381 Manual De Instalación Y Mantenimiento

6. CONTROL SYSTEMS OF THE LED PROJECTORS:
Installations with Mini LED spotlights only, can be controlled from the power supply itself. In installations where there are
also Colorplus spotlights, the power supply can synchronize these spotlights with the Mini LED spotlights.
6.1. Control through the power supply
The power supply is provided with a pushbutton, which is the simplest way of controlling the spotlights. Each press
changes the colour or sequence.
The pushbutton is normally closed (NC). It is connected in the terminals indicated "pushbutton input" shown in figure 8.
With this control system you have 14 function modes: 7 fixed colours and 7 sequences with different colours.
6.1.1. Diagram of the electrical connection
Power supply
In installations with more than four mini LED spotlights, which must be controlled jointly, a single pushbutton should be
installed connected in parallel to the connection terminals.

6.1.2. Function modes

The pushbutton control enables you to create different lighting scenarios inside the pool with two function modes:
Fixed colour: Selection of a fixed colour from seven possibilities.
Length (m)
0-20
20-30
30-50
COLOUR Nº
1
2
3
4
5
6
7
4
Cable section
2.5 mm 2 Cu
4 mm 2 Cu
6 mm 2 Cu
COLOUR
White
Red
Blue
Green
Purple
Cyan
Yellow