Maintenance; Service; Cleaning; Warranty And Liability - Fein GX752H5V6 Manual Del Usuario

GX75.book Seite 14 Mittwoch, 20. August 2008 9:09 09
us

10. Maintenance.

Hazardous Voltage
WARNING
Contact may cause electric shock or
burn.
Pull out the mains plug for maintenance
and repair! Switching the machine on
unintentionally can lead to serious inju-
ries.

10.1 Service.

Have maintenance carried out
WARNING
only through qualified personnel.
Incorrectly mounted leads and components can
cause serious injuries. Have the required service
carried out only through a FEIN customer serv-
ice agent.
For repairs, we recommend our FEIN customer
service centre, the FEIN authorised service cen-
tres and FEIN agencies.
When the machine's power cable is dam-
aged, it must be replaced by a qualified per-
son using a specially prepared power cable,
available from your FEIN customer service
agent.

11. Warranty and liability.

The warranty for the product is valid in accordance with the legal regulations in the country where
it is marketed.
In addition, FEIN also provides a guarantee in accordance with the FEIN manufacturer's guarantee.
For further details on this, please contact your specialist dealer, your national FEIN representative,
or the FEIN customer service centre.

12. Environmental protection, disposal.

The machine should be sorted for environment-friendly recycling in accordance with national laws.
14

10.2 Cleaning.

Prior to any cleaning or mainte-
WARNING
nance, disconnect the machine
from the power supply in order to avoid accidents.
It is best to clean the machine with dry com-
pressed air. When cleaning machines with com-
pressed air, always wear safety goggles.
Cooling-air openings and operating elements
must be clean and may not be obstructed
through other objects. Do not attempt to clean
the openings with pointed objects.
Carry out the following maintenance regularly:
Blow out the ventilation slots at the motor
housing and the marked locations with
compressed air (see Instruction label).
Lubricate the machine daily (when in use)
with machine oil at the locations marked
(see Instruction label).
Check the drive wheel and the contact
wheel for wear and damage each time when
changing the grinding belt. Have damaged
parts replaced.
GX 75