Mounting Instructions; Electrical Connection (See - Fein GX752H5V6 Manual Del Usuario

GX75.book Seite 9 Mittwoch, 20. August 2008 9:09 09
GX 75

4. Mounting instructions.

Before any work on the machine itself, pull the power plug from the socket outlet.
WARNING
Assemble the undercarriage as shown. (Figure 3)
Place the machine on the floor with the top side facing down and mount the undercarriage according
to the figure and instructions on the DVD. (Figure 4)
Due to the danger of accidents, this work must be carried out by persons that are phys-
WARNING
ically capable of lifting the high weight of the machine.
Fasten the undercarriage to the ground with suitable anchor/screw connections. The fastening must
be suitable to withstand the forces occurring during working.
Fig. 3
5. Electrical connection (see appendix).
Hazardous Voltage
WARNING
Contact may cause electric shock or burn.
The machine is not equipped with a mains plug and must be connected to the power supply. The elec-
trical connection, which is to be provided by customer, must be carried out by a qualified electrician.
Observe mains voltage: The mains voltage and the frequency of the power source must agree with
the data on the type plate of the machine.
Before starting operation for the first time, check the rotation direction of the motor. The rotation
direction may be changed only by a qualified electrician.
Tension lever,
undercarriage
us
Fig. 4
Under-
carriage
Tension lever,
undercarriage
Screw
9