Safety Instructions; Environment Concerns - Zanussi ZHC 6846 XA Manual De Instrucciones

SAFETY INSTRUCTIONS

Caution! Closely follow the instructions set
out in this manual. All responsibility, for any
eventual inconveniences, damages or fires
caused by not complying with the instructions
in this manual, is declined. The extractor
hood has been designed exclusively for
domestic use.
Warning! Do not connect the appliance
to the mains until the installation is fully
complete.
Before any cleaning or maintenance
operation, disconnect hood from the mains
by removing the plug or disconnecting the
mains electrical supply.
Always wear work gloves for all installation
and maintenance operations.
The appliance is not intended for use by
children or persons with impaired physical,
sensorial or mental faculties, or if lacking in
experience or knowledge, unless they are
under supervision or have been trained in the
use of the appliance by a person responsible
for their safety.
This appliance is designed to be operated
by adults, children should be monitored
to ensure that they do not play with the
appliance. This appliance is designed to be
operated by adults. Children should not be
allowed to tamper with the controls or play
with the appliance.
Never use the hood without effectively
mounted grating!
The hood must NEVER be used as a support
surface unless specifically indicated.
The premises where the appliance is
nstalled must be sufficiently ventilated, when
the kitchen hood is used together with other
gas combustion devices or other fuels. The
ducting system for this appliance must not be
connected to any existing ventilation system
which is being used for any other purpose
such as discharging exhaust fumes from
appliances burning gas or other fuels. The
flaming of foods beneath the hood itself is
severely prohibited.
The use of exposed flames is detrimental to
the filters and may cause a fire risk, and must
therefore be avoided in all circumstances.
Any frying must be done with care in order to
make sure that the oil does not overheat and
ignite.
Caution! Accessible parts of the hood
may became hot when used with cooking
appliance.
With regards to the technical and safety
measures to be adopted for fume discharging
it is important to closely follow the regulations
provided by the local authorities. The hood
www.zanussi.com
must be regularly cleaned on both the inside
and outside (AT LEAST ONCE A MONTH).
This must be completed in accordance with
the maintenance instructions provided in this
manual). Failure to follow the instructions
provided in this user guide regarding the
cleaning of the hood and filters will lead to
the risk of fires.
Do not use or leave the hood without the
lamp correctly mounted due to the possible
risk of electric shocks.
We will not accept any responsibility for
any faults, damage or fires caused to the
appliance as a result of the non-observance
of the instructions included in this manual.

ENVIRONMENT CONCERNS

Recycle the materials with the symbol
Put the packaging in applicable containers to
recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol
household waste. Return the product to your
local recycling facility or contact your municipal
offi ce department for household waste or the
shop where you purchased this product.
USE
The hood is designed to be used either for
exhausting or fi lter version
INSTALLATION
The mains power supply must correspond to the
rating indicated on the plate situated inside the
hood. If provided with a plug connect the hood to
a socket in compliance with current regulations
and positioned in an accessible area, after
installation. If it not fi tted with a plug (direct mains
connection) or if the plug is not located in an
accessible area, after installation, apply a double
pole switch in accordance with standards which
assures the complete disconnection of the mains
under conditions relating to over-current category
III, in accordance with installation instructions.
Warning! Before re-connecting the hood
circuit to the mains supply and checking
the efficient function, always check that the
mains cable is correctly assembled.
.
with the
.
11