Technical Data; Troubleshooting; Environmental Protection And Disposal - Super Ego ANGLE-78 Manual De Instrucciones

Technical data

Operating power: 230V-50Hz.
Capacity: 780 W.
Idle rotation speed: 11.000 r.p.m.
Grinding discs: 115 mm.
Perimeter speed: 80 m/s.
Grinding spindle thread: M14
Weight (excluding accessories): 1,95 kg.
Protection class:

Troubleshooting

Problem
There is no electric current coming in to the
machine
Motor
does not The motor has overheated
run
The carbon brushes are used
Screws or parts of the machine are loose.
The grinding disc is not set in properly
Vibrations
are too
The grinding disc is not correctly mounted
strong
Workpiece is not properly supported.

Environmental protection and disposal

Packaging materials are raw materials and can be re-used. Separate the different packaging
materials and take them to a designated waste disposal facility. More information can be
obtained from the appropriate authorities.
Old machines do not belong in your household garbage! Dispose of old machines appropriately.
We are all responsible for the environment. The local authorities can inform you of collection
locations and working hours.
When its useful life is over, do not dispose or the machine into the domestic waste, please send
it to authorised places for recycling.
Posible causa Solución
Check your electric connection and supply
Allow the machine to run idle for about 2
minutes so that it can cool down.
Change out both carbon brushes (changing
out carbon brushes)
Tighten all screws.
Set the grinding dis in properly (inserting/
changing the grinding disc)
Mount the grinder correctly (installing the
tool)
Secure the workpiece (in example on a
workbench)
GB
19