Joie i-Quest signature Manual De Instrucciones página 7

!
The load leg has 24 positions.
When the load leg indicator shows
red this means the load leg is in the
wrong position. 6
!
Make sure the load leg is in full
contact with the vehicle floor pan.
Red means it is installed
incorrectly.
6
!
Check to make sure the base is
securely installed by pulling on
both ISOFIX connectors.
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
7
!
The load leg must be installed
correctly with green indicator.
Removing the base
To remove the base, press the
secondary lock button -1
8
then the ISOFIX releasing button
on the ISOFIX connectors before
removing the base from the vehicle
seat. 8
11
7
-1
-2
7
1
8
first and
-2
8
2
Use Side Impact Shield
see images
!
Ensure the side impact protection
shield is locked in the open
position for maximum side impact
safety.
1. Side impact shields are
automatically activated when the
harness buckle is moved back into
position and the harness is
tightened, both sides will be
opened automatically.
!
IMPORTANT: Please note that
unfolding the side impact
2
protection elements does NOT
mean that the child is already
restrained tight enough.
2. The side impact shield opposite
the vehicle door can be closed to
allow more seating space, if
needed. The side closest to the
vehicle exterior should always be
in the open position.
3. The side impact can be manually
opened as shown on
1
-
9 11
9
10
-1& -2
9 9
11
10 -1& 10 -2
.
11
2
1
1
2
12