Securing Child - Joie i-Quest signature Manual De Instrucciones

Securing Child

1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the desired
(Pull from below the fixed
shoulder pads to lengthen) length.
21
2. Unlock the buckle of the
harnesses by pressing the red
button.
22
3. Fix the buckles on the both sides
of the seat shown as which
23
located on the both sides of seat
to make placing the child in rear
facing mode more convenient.
17
21
22
23
We recommend using the full
infant insert while the baby
is under 60cm and can be used
until they outgrow the insert.
The infant insert increases
side impact protection.
1
4. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
!
After the child is seated, recheck whether the shoulder harnesses
are at the proper height.
5. Engage the buckle. Please refer to
24
Remove the head support
portion of the infant
insert when the child's
head no longer fits
comfortably.
Remove the lower part of the
infant insert when the infant no
longer fits comfortably.
Each part of the body inserts can
be used by itself.
2
24
18