Electrical Connections - Hinkley 52 WINDWARD Manual De Instrucciones

ELECTRICAL CONNECTIONS

WARNING: Be sure electricity is turned off at the main power box before wiring.
Four wires are connected to the fan.
1
* Black - this is the "hot" power to run fan.
* White - this is the "common" power to run fan and light.
* Blue - this is the "hot" power for light kit.
* Green - ground wire (on bracket or downrod).
If fan and light are to be connected to the same circuit, black and blue wires
2
can both be connected to house circuit black wire.
NOTE: The other end of the blue wire, (light circuit) is in the switch housing
with a wire nut and label for light kit attachment. The white wire (common for
light kit) is also there.
WARNING: If light kit is not used, DO NOT connect blue wire at the ceiling.
10
| hinkle y.com
Fig. 2
Fig. 1
Fig. 3