Specifications
Cassette player section
Tape track
Wow and flutter
Frequency response
Signal-to-noise ratio
Tuner section
FM
Tuning range
Antenna terminal
Intermediate frequency
Usable sensitivity
Selectivity
Signal-to-noise ratio
Harmonic distortion at 1 kHz
Separation
Frequency response
Capture ratio
MW/LW
Tuning range
Antenna terminal
Intermediate frequency
Sensitivity
Power amplifier section
Outputs
Speaker impedance
Maximum power output 35 W × 4 (at 4 ohms)
4-track 2-channel stereo
0.08 % (WRMS)
30 – 20,000 Hz
58 dB (TYPE I)
61 dB (TYPE II, IV)
87.5 – 108.0 MHz
External antenna connector
10.7 MHz
8 dBf
75 dB at 400 kHz
65 dB (stereo),
68 dB (mono)
0.5 % (stereo),
0.3 % (mono)
35 dB at 1 kHz
30 – 15,000 Hz
2 dB
MW: 531 – 1,602 kHz
LW: 153 – 281 kHz
External antenna connector
10.71 MHz/450kHz
MW: 30 µV
LW: 50 µV
Speaker outputs
(sure seal connectors)
4 – 8 ohms
General
Tone controls
Power requirements
Dimensions
Mounting dimensions
Mass
Supplied accessories
Optional accessories
Design and specifications are subject to change without
notice.
Bass ±8 dB at 100 Hz
Treble ±8 dB at 10 kHz
12 V DC car battery
(negative ground)
Approx. 188 × 58 × 181
mm (w/h/d)
Approx. 182 × 53 × 164 mm
(w/h/d)
Approx. 1.2 kg
Parts for installation and
connections (1 set)
Front panel case (1)
Rotary remote
RM-X2S
RCA pin cord
RC-63 (1 m), RC-64 (2 m),
RC-65 (5 m)
EN
13