T0006UG_6006UG_EN_1.qx3
4
If you already know your PBS channel number,
skip ahead to step 8. If you do not know the
channel number of your PBS station, press ▼ to
select AUTO CLOCK CH SEARCH.Then press
ENTER.
– SETTING CLOCK –
AUTO CLOCK
AUTO CLOCK CH SEARCH
B
AUTO CLOCK CH
MANUAL CLOCK SET
D.S.T.
The TV/DVD/VCR will search for a channel that
●
carries a time signal. Channels that carry the time
will appear at the top of the screen. Use one of
these channels when you enter your AUTO
CLOCK CH at step 9.
This may take several minutes. An ''_ _" appears in
the lower left corner of the screen when the search
is complete.
– AUTO CLOCK CH SEARCH –
08
10
– –
5
Press SETUP to remove the AUTO CLOCK
CH SEARCH screen.
6
Press SETUP to access the menu again.
Press ▲ or ▼ to select SETTING CLOCK.
7
Then, press ENTER.
Press ▼ to select AUTO CLOCK CH,
8
then press ENTER.
– SETTING CLOCK –
AUTO CLOCK
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
B
MANUAL CLOCK SET
D.S.T.
9
Press { or B until the channel number of your
PBS station appears. Use the channel number
you found at step 4.
10
Press SETUP to remove the menu.
11
Press STANDBY-ON to turn off the
TV/VCR/DVD and let the PBS channel update
the clock.
04.5.12
10:09 AM
Page 23
[ON]
[02]
[OFF]
13
[ON]
[08]
[OFF]
Setting the Clock (cont'd) 23
11
4,7-9
5-6,10
• During the Auto Clock Channel
Search, the picture may be dis-
torted.This is normal.
• If there are no PBS stations avail-
able, set AUTO CLOCK to off. Set
the clock manually.
• If the TV/VCR/DVD is connected
to a Cable Box or Satellite
Receiver, select the local PBS sta-
tion on the Cable Box/Satellite
Receiver. Set the TV/VCR/DVD to
the output channel of the Cable
Box/Satellite Receiver (03, 04, or
AUX).
STANDBY-ON PICTURE
SLEEP
SELECT
1
2
3
CH.
4
5
6
7
8
9
VOL.
+100
0
+10
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
DISC
RECORD
MENU
DISPLAY
ENTER
SETUP
TITLE
RETURN
CLEAR
SEARCH MODE
REPEAT
REPEAT
A-B
MODE
AUDIO
SUBTITLE
ANGLE
Helpful Hints