Device Description; Initial Use; Initial Use With Batteries; Initial Use With Mains Part - Beurer FM 150 Pro Instrucciones De Uso

6. Device description

1. Air inlet ("in")
2. Mains socket
3. Air outlet
4. ON/OFF button
5. Air outlet button
6. Stop button*
7. Timer button 10/20/30 min
8. Air hoses
9. Connection for air hoses
(*The stop button interrupts inflation in the event of unpleasant and high pressure)

7. Initial use

• Remove the packaging.
• Remove the grey protection on the hook-and-loop fasteners of the leg and thigh cuffs.
• Check the device, mains part and cable for damage.
• You can either operate the device with batteries (4 x 1.5V AA alkaline type LR06) or using the supplied mains part.
Note
You can use the device either with the supplied mains adapter or with batteries. We recommend using the mains
adaptor for reasons of sustainability.

7.1 Initial use with batteries

1. Open the battery compartment on the rear of the hand switch.
2. Insert four 1.5V AA (alkaline type LR06) batteries. Make sure that the batteries are inserted the correct way
round. See the graphic in the battery compartment. Do not use rechargeable batteries.
3. Close the battery compartment on the rear of the hand switch until you see and hear it click into place.

7.2 Initial use with mains part

Note
Before using for the first time with the mains part, check there
are no batteries fitted in the hand switch.
1. Connect the mains part to the hand switch as shown.
2. Plug the other end of the mains part into a suitable socket.
3. The device is now ready for use.
7
6
5
4
3
1
2
18
9
9
8