Off/On Down Set; Clock; Cancel; To Set The Timer - Panasonic CS-E18RD3EAW Instrucciones De Funcionamiento

To set the timer

Daily timer setting
To turn ON or OFF the unit at a preset time.
TIMER/CLOCK
MODE
1
OFF/ON
2

CLOCK

MODE
1 Press TIMER
• Press once to change the display from clock
to timer or vice-versa.
• Press for 4 seconds to change the display
from daily timer to weekly timer or vice-
versa.
2 Select ON or OFF timer Example:
3 Set the time
4 Confi rm

CANCEL

• To cancel, press
• When ON timer is set, the unit may start early
before the actual set time in order to achieve
the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be
activated fi rst.
• If timer is cancelled manually or due to power
failure, you can restore the previous setting by
SET
pressing .
UP SELECT
3
DOWN SET
4
CANCEL
to enter timer mode
OFF at 22:00
OFF/ON
UP
DOWN
SET
.
Weekly timer setting
Promotes energy saving by allowing you to set
up to 6 programmes in any given day.
TIMER/CLOCK
MODE
OFF/ON
CLOCK
Lights up if Timer operation is selected
OFF Timer
ON Timer
Day to be selected
MODE
1. Press TIMER
display to weekly timer.
UP
2. Press TIMER or
desired day.
SELECT
3. Press to confi rm your selection.
4. "1" will be blinking, press
programme 1.
OFF/ON
5. Press TIMER to select ON or OFF timer.
UP
6. Press TIMER or
desired time.
If you want to set the timer together with
your desired temperature, press
select the temperature.
SET
7. Press to confi rm programme 1. The
selected day will be highlighted with
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• During timer setup, if no button is pressed within
30 seconds, or if the
setting at that moment is confi rmed and timer
setup is ended.
UP SELECT
DOWN SET
CANCEL
Programme number in a
day (1 ~ 6)
Indicates the selected day
Indicates the next timer
operation day
Time to be selected
(10 minutes step)
for 4 seconds to change
DOWN
to select your
SELECT to set
DOWN
to select your
to
TEMP
SET
button is pressed, the
.
9