AGA marvel MA15CL Instrucciones De Instalación, Operación Y Mantenimiento página 10

The Ice Making Process
Your ice machine is unique in how it forms ice with fraction-
al freezing to form a slab of ice that is clear and has less
dissolved solids than the water it is produced from. This is
accomplished by running water over the cold evaporator
plate (see Figure 15) which gradually freezes the water to
produce the ice slab. Pure water freezes first, leaving the
dissolved solids in the residual reservoir water to provide
clear ice.
Figure 15
Water distributor
OPERATION OF THE ICE MACHINE
Ice machine
electronic
control in top
of door
Figure 16
10
When the ice slab reaches the correct thickness, the ice
sheet is released and slides onto the grid cutter (see Figure
17). Here, the ice slab is cut into squares by the grid cut-
ter's heated wires (see Figure 15). The water containing
the dissolved minerals is drained after each freezing cycle.
Fresh water enters the machine for the next ice making
cycle.
Figure 17
Front
panel
Grid Cutter
Water
reservoir
Ice
Deflector
Bin Level
Sensor
Evaporator
Circulation
Pump
Reservoir
drain plug