Tripp-Lite PDUMNV20HVNET Manual Del Propietário página 9

Features
Circuit Breakers (Select Models): If the connected
equipment load on a load bank exceeds the Maximum Load
Rating of the load bank, the circuit breaker will trip. Disconnect
excess equipment and switch breaker to the on position to reset
the breaker. Models with multiple outlet banks have a circuit
breaker for each bank. Circuit breakers are only used to protect
output load banks.
Cord Retention Bracket (Select Models): Provides secure
attachment points for connected equipment cords.
C14 Plug-Lock Inserts (Optional): Use the included C14
plug-lock inserts to secure plugs to C13 receptacles. Attach the
sleeve to the plug making sure the pull tabs remain outside the
plug and that the fit is secure. To unplug equipment properly,
use the pull tabs to remove the plug and insert from the
receptacle.
C20 Plug-Lock Inserts (Optional): Use the included C20
plug-lock inserts to secure plugs to C19 receptacles. Attach the
sleeve to the plug making sure the pull tabs remain outside the
plug and that the fit is secure. To unplug equipment properly,
use the pull tabs to remove the plug and insert from the
receptacle.
Mounting Brackets: Use these brackets to mount the PDU.
PDUMVROTATEBRKT Mounting Accessory: Use these
V-shaped brackets to mount the PDU with its outlets facing the
rear of the rack.
9
16-10-210-933667.indb 9 12/19/2016 4:26:21 PM