Cleaning And Maintenance; Technical Specifications - HQ-Power VDPDP134 Manual Del Usuario

8.

Cleaning and Maintenance


All screws for installing the devices or parts of the device have to be screwed down tight and must
not be corroded.

The housing, mounting supports and connections should not be modified or tampered with e.g. do
not drill extra holes in mounting supports, do not change the location of the connections, etc.

The electric power supply cables must be undamaged. Have the device installed by a qualified
technician.

Disconnect the device from the mains prior to maintenance activities.

Wipe the device regularly with a moist cloth. Do not use alcohol or solvents.

Entrust a qualified technician with the maintenance of this device. Contact your dealer for spare parts
if necessary.
9.

Technical Specifications

max. power input
number of channels
max. total load
max. total current
max. load per channel
analogue input & output
DMX input & output
fuses
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 22/09/2014
VDPDP134
230 VAC, 50 Hz, three-phase or single-phase, 60 A
6
20 A per phase
max. 10 A per channel
2200 W
8-pin DIN socket (0-10 VDC)
3-pin XLR socket
automatic circuit breaker 20 A
482 x 381 x 89 mm
8.4 kg
5 ©Velleman nv