Parts And Controls - Bosch VitaMaxx MMBV6 Serie Instrucciones De Uso

■ Check that all parts are present and
examine them for obvious damage.
X Fig. A
■ Thoroughly clean and dry all parts
before using for the first time.
X "Cleaning and maintenance" see
page 23
Note: There may be a slight foreign smell
when using the new blender for the first
or second time. This is not a sign of any
malfunction.

Parts and controls

High-performance motor block
The blender is equipped with a high-
performance motor, enabling up to 37000
revolutions per minute.
On/off switch
To switch the appliance on and off.
Vacuum unit with cap
The blender is equipped with a vacuum
pump that can apply a vacuum to the
blender jug before processing. This
reduces the oxidation of food during and
after processing. The result is a more
homogeneous consistency and a more
natural colour to food while preserving
vitamin C and other nutrients that react
to oxygen for longer. A vacuum can also
be applied to the ToGo bottle and storage
containers to maintain freshness and
extend the shelf life of food contained in
them.
The cap is used to apply a vacuum to the
blender jug.
Status display and symbols
The status display indicates the manually
selected speed or the progress of the
vacuum application process or of an
automatic programme by means of several
LEDs. The higher the speed, or the more
advanced the vacuum application process
or a programme, the more LEDs will light
up. When all LEDs light up, the maximum
speed has been reached or the selected
programme completed.
Illuminated symbols also show other
information.
Display Meaning
Vacuum is being applied.
Food is being blended
manually.
programme running.
Vacuum is being applied,
followed by automatic
blending.
programme running.
Fault in appliance
X "Troubleshooting" see
page 27
Symbols and markings
Symbol Meaning
Warnings on lid
Max 60°C
■ Do not process ingredients
hotter than 60 °C.
Marking for positioning
blender jug.
Position blender jug
screw on securely .
Marking on cap.
Marking on vacuum valve.
Position vacuum valve
screw on securely .
Parts and controls
programme running.
programme running.
a nd
en
and
19