Disconnecting the heating element.
The heating element may be disconnected by switching the switch to (OFF) as shown in Fig. 4
Information relative to the pilot lights.
Light leds on the top of the hand dryer (see figure 5) give advice about:
1: The unit in standby (green colour) or operating (orange colour).
2: Red colour led brigths when motor has a problem of consumption (due to brushes
which may be wearing out or due to a blocked or locked sate of motor).
3.- The blue led illuminates when the water tank is full, indicating that the tank must be
emptied.
Air filter
Air filter must be changed as the pictures of figure nº 6 shows.
No smell load charge
Figure nº 7 shows how to install the no smell charge.
.
Figure 5
Figure 6
Figure 7
-14-