The downdraft allows a height adjustment of the structure from 820mm to 900mm from the floor to under the work
top. This adjustment is possible by working on the feet and on the feet supports (Fig. 1).
PARSIFAL + AME + AMF + AMR
As for the height adjustment of the moving part of the downdraft, see Fig. 2.
According to the thickness of the work top and the cover, it is possible to adjust of 33mm.
The difference in thickness between the work top and the cover must be at least 17mm (23mm vers. Kit led)
PARSIFAL
This adjustment is possible by acting on the two nuts that secure the central pivot of the actuator (Fig. 3).
PARSIFAL + AMD
PARSIFAL KIT LED
EN -10
Fig. 1
Fig. 2
Fig. 3