Ashley M9X832 Manual De Instalación Y Operación página 7

Installat ion Guide
5
Flip the foot end of the bed from the box
and lay it on top of the head end.
D
O A R
D B
H E A
7
(M9X9) Motion sensor installation
Prepare The Motion Sensor Hardware.
STEP 1: Connect the motion sensor
to the mounting bracket.
STEP 2: Rotate the mounting
bracket 90 degrees clockwise
STEP 3:
= +
Motion Mounting
Sensor
DONE !
Customer Service Toll Free: 1-800-248-5988
6
H E A
Connect The Motion Sensor Connectors.
STEP 1: Clip the mounting bracket onto the center adjustable legs
as illustrated.
Bracket
H E A
STEP 2: Connected the motion sensor connectors as illustrated.
Note there are two connectors, one on each side of the bed.
—04—
Install the remaining 2 legs on the foot
end of the bed, make sure the legs are
tight. Uncoil the DC power cord
(connected to the control box)
and put it to the side of the bed.
D
O A R
D B
Control Box
DC Power Cord
D
O A R
D B