Schneider Airsystems FSP-FP-HTE2 WB Manual De Instrucciones página 8

GB
FSP-FP-HTE2 WB
Fitting replaceable cups (item 05):
1. Screw adapter (Pos. 07) onto depres-
surised unit.
2. Mount the anti-drip block (Pos. 09) on
the base of the replaceable cup (Pos. 05)
and press on as far as the stop (Fig. 4a).
3. Turn anti-drip block to position "Mix
Close" (Fig. 4b).
4. Place replaceable cup on firm base and
fill with material.
5. Insert filter in cover of replaceable cup
(Fig. 4c) and mount the cover on the re-
placeable cup.
6. Place the sealed replaceable cup in the
union nut (Pos. 12) (Fig. 4d).
7. Mount paint spray gun with support
adapter on the replaceable cup and bolt
union nut and support adapter together
(Fig. 4e).
Mix ratio:
The scale (1:1, 5:1, 4:1, 3:1, 2:1) on the
transparent replaceable cup allows the
precision mixing of paint and varnish
without requiring a mixing gauge.
Cleaning the supply channels:
If you are working with different paints or
materials, before changing the replace-
able containers a replaceable container
with solvent must be fitted on the paint
spray gun to clean the supply channels.
Operation:
1. Connect tool.
2. Turn anti-drip block (Pos. 09) to position
"Spray Open".
3. Pull the trigger lever (Pos. 02) to start
work with the paint spray gun.
I/ 4
After use:
1. Depressurise tool.
2. Turn anti-drip block (Pos. 09) to position
"Mix Close".
3. Place paint spray gun on base of replace-
able container, ensuring it is stable.
4. Release union nut, hold replaceable cup
firmly, lift off paint spray gun with sup-
port adapter and set it aside.
5. Clean tool and replaceable container.
If the paint spray gun is separated from
the replaceable container, remaining ma-
terial can still run out of the paint spray
gun.
1.7 EC Declaration of Con-
formity
Paint spray gun
FSP-FP-HTE2 WB
Year of CE mark: 2009
We declare under our sole responsibility that
this product complies with the following
guidelines and standards:
DIN EN ISO 12100, DIN EN 1953, BGR 500,
DIN 31000, DIN 31001 - 1,
94/9/EC, 98/37/EC (before 28.12.2009);
2006/42/EC (after 29.12.2009).
pp Marco Lodni
Head of Development/Testing
03.2009
Schneider Druckluft GmbH
Ferdinand-Lassalle-Str. 43
72770 Reutlingen
Serial no.
T460044