HP HD PRO 2 Información De Introducción página 6

7. Select Paper type and choose the paper to print. If you do not already have a media profile for the paper type you are
planning to use, you must create one. See the preceding section.
8. Set the number of copies.
a. Press the Copies
b. Enter the number of copies in the Edit field.
This option allows you to leave the system working unattended.
9. If you have selected more than one copy, you can select
10. To start a single page copy flow, press the
11. To start a multipage copy flow, press the
button.
Press the Stop button to cancel the current preview or copy process.
Press the Reset button to clear the settings you have configured and reset the program to the default values.
Scan to file
1. Select the Scan tab and insert your document.
a. Place the document with the image facing down and the top edge forward in the scanner insertion slot. Feed the
original into the scanner. Align the right edge of the document with the right edge of the insertion slot.
b. Adjust the left paper guide to the paper width so that the paper is aligned as it feeds into the scanner.
2. Select the Scan tab, and then configure the scan settings, which are described in the following steps.
Output settings such as margins, layout, and media profile can be configured later, when you print the file.
3. Select Color or B&W scanning.
4. Select the type-of-original template that best describes your original.
5. Select the scan resolution.
a. In the Scan tab, press the
• Set the scan resolution in
• Select Descreen
• Select Turbo
dpi.
6. Use the Size and Resize
None to maintain the size of the original.
If you want to change the settings for any of these options, or want to create a custom-paper size, press the
button. To save the changes or the custom-paper size, press the
7. Press the File destination
file to an email address (a network connection is required). The Change Folder dialog box appears. Within this dialog,
you can:
• Press the arrows to navigate the folders.
• Press the folder up button (marked "..") to move up a level.
• Press the New Folder
• Press a folder name to move your search to that folder's level.
• Scan to Email / Network
8. The default filename is MyImage<00X> where is "X" is a number counter. To change the default name, press the
Name button and enter a new name.
9. Press File Format to select the output-file format. Various format options are available, including PDF multipage.
Introductory Information
5
button if you want to make more than one copy of the loaded document.
Copy
Add page
Scan resolution
dpi.
to increase print quality but reduce scanning speed.
to increase scanning speed but reduce print quality. It has no effect at resolutions below 300
options to define the dimensions of your scanned image. You can use
button to select the folder to which the scanned file is saved or email to send the scanned
button to create a new folder within the current folder.
collate on to print the different sets with the original order.
button (only for non-HP PageWide XL printers).
button and, after adding the last page of the job, press
button. Choose among various scan-quality options:
New button and enter a name for it.
Finish job
Size: Auto and Resize:
Tool
File