English
2.
Put your finger under the left side of the roll paper cover and pull it up to open it. (See
illustration D.)
If the roll paper cover will not open, see "The roll paper cover will not open (the
autocutter blade is locked)."
3.
Remove the jammed paper.
4.
Close the roll paper cover.
When cut sheet paper is jammed
Depending on where the paper is jammed, open the MICR cover, rear cover, or scanner
cover, and remove the jammed paper.
To open the MICR cover, pull the MICR cover open lever and open the MICR cover by
pulling it outward. (See illustration R.)
To open the rear cover, pull the rear cover open lever and open the rear cover by pulling it
outward. (See illustration S.)
To open the scanner cover, pull the scanner cover open lever and open the scanner cover
by pulling it outward. (See illustration O.)
When an ID card is jammed
1.
Pull the scanner cover open lever and open the scanner cover by pulling it outward.
(See illustration O.)
2.
Remove the jammed ID card.
3.
Close the scanner cover firmly until it clicks in place.
22 TM-S9000MJ User's Manual