Product Registration; Using The Teac Global Site - Teac AI-101DA Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

o Do not put cloth on top of the unit or place

the unit on top of bedding or thick carpets .

Doing so could cause the unit to overheat

and damage it .

o Do not move the unit during use . The volt-

age supplied to the unit should match the

voltage printed on the rear panel . If you are

in any doubt regarding this matter, consult

an electrician .

o Do not open the body of the unit as this

might result in damage to the circuitry or

cause electric shock . If a foreign object

should get into the unit, contact your dealer .

o When removing the power plug from the

wall outlet, always pull directly on the plug;

never yank on the cord .

o If a TV is turned on while the unit is on, static

might appear on the TV screen depending

on the characteristics of the TV broadcast

signal . This is not a malfunction of the unit

nor of the TV . If this occurs, put the unit into

standby .

Note about installation

This unit can be used both horizontally and

vertically (on its side) . When using it in a verti-

cal position, attach the included rubber feet to

the four places on the bottom .

Bottom when placed vertically

Rubber feet

Maintenance

Wipe dirt from the top cover and other panel

surfaces using a soft cloth that has been slightly

dampened with a diluted neutral cleanser .

Do not wipe with chemical cleaning cloths, thin-

ner or other chemical agents . Doing so could

damage the surface .

V For your safety, disconnect the power

cord from the socket before cleaning.