Homelite UT43100 Manual Del Operador página 28

In addition to preventing chain contact with solid
objects at the nose of the bar, the SAFE-T-TIP also
helps keep the chain away from abrasive surfaces,
such as the ground. Keep it on the right hand side
of the bar where it will be between the chain and
the ground during flush with ground cutting.
The mounting screw requires a 5/16 in. wrench (or
adjustable wrench) to achieve the recommended
torque of 35 to 45 in.lb. A torque within this range
can be achieved by using the following method.
 Tighten the screw with wrench until snug.
 From the snug position, tighten the screw an
additional 3/4 of a turn using a wrench.
STORING THE PRODUCT
See Figure 50.
 Clean all foreign material from the product. Store
it in a well-ventilated place that is inaccessible
to children. Keep away from corrosive agents
such as garden chemicals and de-icing salts.
 Model UT43120 only: Always place the scab-
bard on the bar and chain before storing or
transporting the chain saw. Use caution to avoid
the sharp teeth of the chain.
 Model UT43120 only: Place chain saw in the
storage bag as shown before storing or trans-
porting.
MAINTENANCE
tigHten
3/4 oF a
Page 28 — English
tUrn
Model Ut43120 onlY
Storage bag
oPeningS
Fig. 49
ziPPer
Fig. 50