4 - Installation Instructions
EN
STEP 4
Slide back more and tilt back (2), putting the rear legs on the
floor and then mount the front legs (3) while in this angled
position supported by the rear legs and the skid.
2
STEP 5
Remove the base while supporting the front of the range (4)
and lower to the floor in a controlled manner.
4
8
STEP 6
In case it is necessary to move the range; using the foam and/
or cardboard packaging (5), replace them around the range
strategically to protect the finished surfaces of the range from
contact with the hand-truck and any straps around the unit (6).
In the case of smaller ranges, you may use this technique to
remove the range from the skid and installing the legs (7. Tilt
the range to lower the hand-truck wheels off the skid. Place
appliance runners on the floor at the left and right sides in
front of the opening when moving into final position to protect
flooring. The oven door(s) add(s) a great deal to the overall
weight of the range, you may find it helpful to remove the
doors if moving the range a significant distance. Refer to the
included instruction manuals for how to remove and reinstall
the doors.
5
3
6
7