Introduction; Proper Use; Features And Equipment - Parkside PHKS 66 Instrucciones De Utilización Y De Seguridad

Introduction

the following pictograms are used in these operating instructions / on the device:
Read instruction manual!
observe caution and safety notes!
Caution – electric shock!
Danger to life!
V ~
Volt (AC)
n
Design no­load speed
0
W
Watts (Effective power)
Safety class II
Risk of explosion!
Keep children away from
electrical devices!
Circular saw PHKS 66
Introduction
Q
Please make sure you familiarise your­
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow­
er tools correctly. To help you do this please read
the accompanying operating instructions. Keep
these instructions in a safe place. If you pass the
device on to anyone else, please ensure that you
also pass on all the documentation.

Proper use

Q
For sawing longitudinal, cross and mitre cuts in firm­
ly supported solid wood, plywood, plastic and
lightweight construction materials. Please note that
the blade pre­installed in the saw as supplied is in­
tended for use with wood only. Any other use or
modification to the device shall be considered as
48 GB/MT
For indoor use only!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Caution, laser! Do not expose yourself
to laser radiation.
Proper procedure and handling.
Automatic power delivery system
Electronic soft start
Do not dispose of rechargeable batteries
with your household refuse!
Dispose packaging and appliance in
an environmentally­friendly way!
improper use and could give rise to considerable
dangers.
Not suitable for commercial use.

Features and equipment

Q
Rotation speed setting wheel
1
Safety lock­out
2
oN / oFF switch
3
Spindle lock
4
Cutting depth setting clamp
5
Allen key
6
Automatic blade guard
7
Release lever for the automatic blade guard
7 a
Base plate
8
Cutting angle setting clamp
9
Battery compartment cover
10
Laser oN / oFF switch
11
Laser
12
Laser outlet aperture
12 a
Cutting angle scale
12 b
Wing screw for guide fence
13
Guide fence slot
14