Ashley Signature Design P015-900 Manual Del Usuario página 12

7. Attach the 3 mesh guards (G) onto the
hooks at the top of the upper supporters (F).
8 . Place the propane gas tank (not
included) into the tank holder. Tighten the
preassembled wing screw clockwise to
ensure the propane tank is secure. Replace
the door (E)after the tank is connected to
the regulator (see below).
9.Turn the cylinder valve on the tank
clockwise to close the propane tank. Attach
the preassembled regulator to the cylinder
valve by turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by hand
only. Open the tank valve. Apply a solution
of soapy water to the tank-regulator
connection and to the valve-hose
connection to check for leaks. If soap
bubbles continue to form, the connection
has a leak. If a leak is found, close the tank
valve and tighten all connections. NEVER
USE A FLAME TO CHECK FOR
LEAKS AS DOING DO CAN CAUSE
AN EXPLOSION OR FIRE RESULTING.
IN PROPERTY DAMAGE, SERIOUS
BODILY INJURY OR DEATH.
P015-900
INSTALLATION
Page 12 of 49