Compatible Products; Warranty & Service - DeWalt DW7231 Manual De Instrucciones

NOTE: Ensure a flat washer (F) is used between plywood (I)and
lock washer (G).
d. Tighten all hardware.
Removing the Saw
Once the miter saw is fastened to the brackets, it can be removed by
grasping the release levers, pulling up slightly to clear the beam and
can be set down on the rubber feet for transportation or cleaning.
Accessories
WARNING: Since accessories, other than those offered by
D WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk of
injury, do not create unstable conditions and use only with D
miter saws and work stands.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory, please contact D
Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286,
call 1-800-4-D WALT (1-800-433-9258) or visit our website www.
E
dewalt.com.

COMPATIBLE PRODUCTS

DW723 – Heavy-Duty miter saw stand
DWX723 – Heavy-Duty miter saw stand
DWX724 – Compact miter saw stand
DWX725 – Heavy-Duty work stand
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by a D
center, a D WALT authorized service center or other qualified service
E
personnel. Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance
loss, such as fire, flood or theft, your registration of ownership will
serve as your proof of purchase.
• FOR YOUR SAFETY: Registering your product will allow us to
contact you in the unlikely event a safety notification is required
under the Federal Consumer Safety Act.
Register online at www.dewalt.com/register.
WALT
E
Three Year Limited Warranty
D WALT will repair, without charge, any defects due to faulty materials
E
or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool abuse.
WALT
E
For further detail of warranty coverage and warranty repair information,
visit www.dewalt.com or call 1-800-4-D
This warranty does not apply to accessories or damage caused where
repairs have been made or attempted by others. This warranty gives
you specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, D
D WALT will maintain the tool and replace worn parts caused by
E
normal use, for free, any time during the first year after purchase.
WALT factory service
E
5
WALT (1-800-433-9258).
E
WALT tools are covered by our:
E
1 YEAR FREE SERVICE