Connecting The Water Lines - LG WM3477HW Guía Del Usuario E Uía Del Usuario E Instrucciones De Instalación

CONNECTING THE WATER LINES

NOTE:
• For your safety, and for extended product
life, we recommend using high-quality LG
components. LG is not responsible for product
malfunction or damage caused by the use of
separately purchased non-LG parts.
• Use new hoses when installing the washing
machine. Do not reuse old hoses.
• Contact LG Customer Service for assistance in
buying hoses: 1-800-243-0000.
• Periodically check the hoses for cracks,
leaks and wear, and replace the hoses every
fi ve years. Do not stretch the water hoses
intentionally, and make sure that they are not
crushed by other objects.
• Water supply pressure must be between 20
psi and 120 psi (138 – 827 kPA). If the water
supply pressure is more than 120 psi, a pressure
reducing valve must be installed.
• To provide optimum washing performance the
hot water temperature should be set at 120 –
135°F (48-57°C) and the cold at 60°F (15°C).
Water Hose
(to water inlet
Rubber Seal
on washer)
or
Water Hose
Rubber Seal
(to water inlet
on washer)
2
Insert a rubber seal into the threaded
fi ttings on each hose.
I N S T A L L A T I O N I N S T R U C T I O N S I N S T A L L A T I O N I N S T R U C T I O N S
1
Rubber Seal
Water Hose
(to tap)
3
Water
Inlets
NOTE: Do not cross-thread the hose fi ttings.
Attach the hot water line to the red hot water
inlet on the back of the washer. Attach the
cold water line to the blue cold water inlet on
the back of the washer. Tighten the fittings
securely.
Water Tap
Attach the hot water line to the hot water
faucet. Attach the cold water line to the cold
water faucet.
Tighten the fi ttings securely. Open the water
faucets fully to check for leaks.
Hot water tap
Cold
water
tap
11