Safety Overload; Maintenance; Cleaning The Compressor'S Outer Case - John Bunn Neb-u-Lite LX2 Manual De Usuario

Note If you need to interrupt treatment, move the ON/OFF
switch to the OFF position.
6. When the treatment is complete, move the ON/OFF
switch to the OFF position to turn off the compressor.
7. Unplug the compressor from power outlet.
8. Disconnect nebulizer from tubing.
9. Clean nebulizer as instructed in MAINTENANCE/Clean-
ing the Nebulizer Cup.

safety overload

Note: Do not exceed 30 minutes of continuous operation.
1. The motor of this device has a built-in thermal overload
protector. Should the motor overheat, the protector
will automatically shut off the motor. Should this occur,
move the ON/OFF switch to the OFF position and allow
the motor to cool down for approximately 30 minutes
before turning it on again.
2. If the overload protector shuts off the motor frequently,
you may have an unstable voltage situation.
3. If the device shuts down and cannot restart, it may need
to be replaced. Call your Graham-Field dealer immedi-
ately.

MAINteNANCe

Cleaning the Compressor's outer Case

WARNINg: Electrical shock hazard. do not remove the
outer case of the device. All disassembly and maintenance
of the device must be performed by a qualified service
technician. Refer service to qualified service personnel.
WARNINg: This device does not require oil. do not attempt
to lubricate any internal parts.
WARNINg: Unplug device before cleaning. do not sub-
merge in water for cleaning.
Wipe the compressor's outer case with a clean, damp cloth
weekly to keep it dust-free. Do not use any powdered type
cleaners or soap.
John Bunn Neb-u-Lite LX2 Nebulizer Compressor 9