Parameter Setting - Gewiss Chorus GW 10 701 Manual De Instrucciones

Ocultar thumbs Ver también para Chorus GW 10 701:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

OPERATING INSTRUCTIONS
Press the key
once to set the parameters.
The SET symbol and the clock appear on the display, while the bar of the day of the week
starts blinking.
At this point it is possible to modify, in sequence:
- day of the week,
- hours,
- minutes,
- temperature unit of measure,
- set point T1,
- set point T2,
- set point T3,
- antifreeze/high temperature protection temperature value
- self-learning activation (only available in "heating" operating mode)
- differential regulation value
Alternatively it is possible to scroll the sequence pressing key
be modified is selected. The value of each parameter is confirmed by pressing key
setting phase is exited by pressing key
st key entry.

Parameter setting

again or, automatically, 30 seconds after the la-
Setting the day of the week
When the day of the week bar blinks, select the current
day with keys
(Monday=1, Tuesday=2 ... Sunday=7).
Press key within 30 seconds to confirm the set value.
34
Temperatures used in the
heating or air conditioning
program,differentiated
by type of operation.
, until the parameter to
.
. The

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Chorus gw 14 701

Tabla de contenido