Tabla de contenido
Publicidad
Specification
The figures stated in the specification are as measured 0-50 mm from the base of
the well of the insert, using an SPRT, at the time of calibration.
Measuring zone
Depth of well in insert
Temperature range
Temperature accuracy in measuring zone
Temperature uniformity in measuring zone
Temperature uniformity in measuring zone
Temperature stability after 1 hr
Display resolution
Heat up rate
Cool down rate
Fan cooling
Comms Port 9way D type
Dimensions
Wells in the block:
Central Well for inserts, see the list of inserts at the back of this book
Reference well
Working conditions
The Tecal units are designed to work safely under the following conditions:
Ambient temperature range
Humidity
condensing
Note: The control specifications quoted are for an ambient temperature range
of 10°C to 30°C. The specification may deteriorate outside this range but the
unit will still work safely.
Radio frequency interference tested and passed to EN50081-1.
Immunity Tested and passed to EN50082-1
35 minutes
30 minutes
Height
Width
Depth
Depth
Diameter
Depth
Diameter
T E C A L 6 5 0 S O P E R A T O R ' S M A N U A L
0 to 50 mm
from base of well
152.4 mm
20°C
above ambient
to 650°C
±0.4°C
±1.0°C at 400°C
±1.3°C at 650°C
±0.09°C
0.1°C
20°C to 600°C
600°C to 200°C
Automatic
Full bi-directional RS232
272mm
185mm
439mm
159mm
38.2mm
146mm
6.6mm
5°C to 40°C
Up to 95% relative humidity, non-
0" to 2"
from base of well
6"
36°F
above ambient
to 1202°F
±0.72°F
1.8°F at 752°C
2.3°F at 1202°F
±0.16°F
0.1°F
68°F to 1112°F
1112°F to 392°F
10.7"
7.28"
17.28"
6.25"
1.5"
5.7"
0.26"
PAGE 9
Publicidad
Tabla de contenido
