T E C A L 6 5 0 S O P E R A T O R ' S M A N U A L
Packing
When you receive your unit, make sure you keep the original packing in case
you ever need to return it for service or repair. When returning a unit, remember
to remove the insert from the temperature controlled block. The unit must be
transported in the original packing to avoid damage. The packing comprises;
the unit in the soft carrying case packed with foam into an outer cardboard box.
Techne accepts no responsibility for damage incurred unless the unit is
correctly packed and transported in this way.
Ensure that the block support plate is in place should you need to return the
unit.
Block Support Plate
When you first remove the Calibrator from the carrying bag you will find a block
support plate covering the block. You will, of course, have to remove this in
order to use your calibrator. It is not a tight fit and can be easily lifted by one or
more of the screws on the top.
It is highly recommended that you replace this support plate each time you are
moving the unit from place to place. It locates in three of the holes in the top
guard plate and should be carefully pushed into place.
PAGE 10