Technical Data; Before Starting The Equipment - EINHELL BT-VC 1250 S Manual De Instrucciones

Anleitung_BT_VC_1250_S_SPK7:_
GB
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage:
Power input:
Container volume:
Weight:
Protection class:
Sound power level

5. Before starting the equipment

Important!
Before you connect the equipment to the mains
supply make sure that the data on the rating
plate are identical to the mains data.
The appliance may only be connected to a
shock-proof socket!
5.1 Appliance assembly
Fitting the appliance head (Fig. 4)
The appliance head (3) is fastened to the container
(7) by the locking hook (6). To remove the appliance
head (3), open the locking hook (6) and remove the
appliance head (3). When fitting the appliance head
(3), make sure that the locking hook (6) locks into
place correctly.
Assembling the wheels (Fig. 5)
Fit the wheels (13) in accordance with fig. 5.
Fitting the handle (Fig. 8)
Use a screwdriver to fit the handle (8).
Mounting the hook for the cable store (Fig. 12)
Press the hook for the cable store (21) into the mount.
After use, the power cable can be wound up onto the
hook (21) and the head (3).
10
19.01.2010 13:37 Uhr Seite 10
5.2 Fitting the filter
Important!
Never use the wet and dry vacuum cleaner without a
filter!
Always ensure that the filters are perfectly secure!
Fitting the foam filter (Fig. 6)
For wet-vacuuming, slip the supplied foamed plastic
230 V ~ 50 Hz filter (15) over the filter basket (Figs. 2/4).
1.250 W
Fitting the additional filter (Fig. 7)
20 l
For dry vacuum cleaning always use the supplied
additional filter (20). Mount the additional filter, so
5.0 kg
that no air is sucked through the filter cage (4)
II / ®
without being filtered.
80 dB(A)
Assembling the dirt bag (Fig. 9)
For vacuuming fine, dry dirt it is recommended that
you fit the dirt bag (14). Slip the dirt bag (14) over the
vacuuming hole. The dirt bag (14) is suitable for dry-
vacuuming only. The dirt bag makes it easier to
dispose of the sucked-in dust.
5.3 Fitting the suction hose (Fig. 3, 10, 11)
Connect the suction hose (10) to the corresponding
connector on the wet and dry vacuum cleaner,
depending on the application required.
Vacuuming
Connect the suction hose (10) to the suction hose
connector (8)
Blowing
Connect the suction hose (10) to the blow connector
(9)
One or more of the elements which make up the 3-
part suction tube (11) can be attached to the suction
hose (10) to extend it. The adapter (19) must be
inserted between the suction tube (10) and the
combination nozzle (12) or crevice nozzle (16).
5.4 Suction nozzles
Combination nozzle (12)
The combination nozzle (12) with attachments (17,
18) is for vacuuming solids and liquids over medium
to large areas. The crevice nozzle (16) is specially
designed for cleaning cervices and edges.