Fagor 8H-875TCB Manual De Instrucciones página 63

CLEANING AND MAINTENANCE
l Oven is equipped with easily removable
wire shelf supports. To remove them for
cleaning use size 3 Allen key to undo the
fixing screws from shelf support holders
Once cleaned, replace the shelf supports
in oven chamber. Before tightening, make
sure the shelf support holders are secure
in the holes provided in oven chamber
wall.
Removing wire shelf supports
l Ovens has stainless steel sliding tel-
escopic runners attached to the wire shelf
supports. The telescopic runners should
be removed and cleaned together with
the wire shelf supports. Before you put
the baking tray on the telescopic runners,
they should be pulled out (if the oven is hot,
pull out the telescopic runners by hooking
the back edge of the baking tray on the
bumpers in the front part of the telescopic
runners) and then insert them together
with the tray.
Important!
Do not wash telescopic runners in a dish-
washer.
Removing telescopic runners
Installing telescopic runners
63