Turning On; Hotplates; Oven; Turning On And Adjusting The Fan Oven - Lotus TP Serie Guia Para La Intalación E Instrucciones De Uso

Check the connection of the appliance and start it up following the instructions.
The first time the hotplate is used, it is advisable to turn on for a few minutes, and at maximum power, all the hotplates,
in order to dry out any humidity in the insulating mass of the elements. The first time the oven is used, it is advisable to
take out all the removable parts and to heat it up to a temperature of 250°C.
Any kind of food (meat, legumes, fish, rice, eggs, vegetables, etc.) can be cooked on the hotplates, providing suitable
pans are used.

Hotplates:

Switch on the main switch installed above the appliance. Turn the control knob corresponding to the hotplate from
position "0" to the degree of coking desired, between 1 and 4. The light comes on, as son as the power supply is on. It is
advisable to turn on the hotplate at maximum temperature and, as soon as this is reached, turn the control knob to the
level desired. To turn off the hotplate, turn the knob back into position "0".

Oven:

Turn the control knob to the right and set the temperature wanted.
To turn the oven off, turn the knob to the left to position 0.
To turn the oven on, turn the selector knob (see figure) to the right or left into one of the
following positions
Caution: when the oven is on the door must be kept shut otherwise the knobs and protection
sheet could get hot and be damaged.

TURNING ON AND ADJUSTING THE FAN OVEN

The hot air made to circulate by the fan is distributed in all parts of the oven chamber to ensure
even cooking results. Since the oven chamber is heated evenly, different foods can be cooked
together on different rungs
Turn the knob from "O" into the desired position between 50° and 300°; The white and green
lights come on.
The green light indicates the presence of electrical tension.
The white light shows that the heating element is working; when the temperature is reached, it
goes out. To turn off the appliance, turn the knob into position "O".
NB: TPFV-98ET are provided with an acoustic timing device, able to signal a maximum time
of 120 minutes. Turn the knob to the right, positioning on the time desired, between and
including 0 to 120 minutes (see figure); at the end of the set time, the alarm goes off.
Attention! During cleaning, do not wash the external parts of the appliance with direct
sprays of water or with high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry
cloth. Do not use abrasive or corrosive detergents.
GB
IT

TURNING ON

Top + bottom heating element
Bottom heating element
Top heating element

MECHANICAL TIMER

CLEANING AND MAINTENANCE

IE
CH
25