Turning On; Cleaning And Maintenance; Procedure To Follow If The Appliance Is Not Going To Be Used For Some Time; Procedure To Follow In The Event Of A Breakdown - Lotus PCC-74ET Guia Para La Intalación E Instrucciones De Uso

GB IE

TURNING ON

Switch on the main switch installed above the appliance. Turn the control knob corresponding to the hotplate from
position "0" to the degree of heating desired, between 1 and 6. The light comes on, as son as the power supply is on.
The green light indicates the presence of electrical tension. To turn off the hotplate, turn the knob back into position
"0". The hotplates are made up of a nucleus and a crown.
Turning the knob, as indicated above, only the nucleus of the hotplate comes on; turning the knob beyond position "6",
the crown also comes on and the temperature can, once again be regulated from pos. "1" to pos. "6".

CLEANING AND MAINTENANCE

Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry
cloth. Do not use abrasive or corrosive detergents.
Cleaning the crystal
The crystal must be cleaned with degreasing liquids, acids containing vinegar and lemon, suitable for cleaning ceramic
and crystal. It is advisable to carry out this operation when the crystal is not completely cold, so that spilled food,
burned grease, etc. can be softened using a damp cloth and removed whilst still warm with an ordinary scraper, in order
to avoid damaging the crystal surface.
Do not use abrasive or corrosive detergents.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING TO BE USED FOR
SOME TIME
Clean and dry the appliance carefully according to the instructions. Disconnect the power supply.

PROCEDURE TO FOLLOW IN THE EVENT OF A BREAKDOWN

In the event of breakdown, turn off the appliance, disconnect the power supply by using the device situated above the
appliance and notify the after sales service.
MAINTENANCE (only for qualified personnel)
Any kind of maintenance must only be done by qualified personnel. Before carrying out maintenance,remove the plug
or switch off the switch above the appliance.

ACCESSIBILITY

To get to the junction-box, remove the back of the appliance. The control elements are reached from the front control
panel; unscrew the fixing screws from the control panel and remove it.
20