Applicable Documents - Balluff BSI R11A0-XB-CX-S75G Serie Manual De Instrucciones

BSI R11A0-XB-CX...-S75G
Capacitive uniaxial inclination sensor with analog output
The CE symbol confirms that our products
comply with the requirements of the current
EU directive.
Scope
These instructions describe the structure, function,
installation and operation of the following inclination
sensors:
Order code Type
BSI0002 BSI R11A0-XB-CXS045-S75G
(Measuring range ± 45°)
BSI0004 BSI R11A0-XB-CXP360-S75G
(Measuring range 360°)
BSI001J BSI R11A0-XB-CXP360-S75G-101
(Measuring range 360º + measuring
protocol)

Applicable documents

For more information about this product, please visit
www.balluff.com on the product page, and see for
example the following documents:
– Data sheet
– Disposal
– Declaration of Conformity
Intended use
The inclination sensor was built to monitor the tilt angle in
the direction of an axis.
Inclination sensors are installed for use in, for example,
machines, equipment, devices and systems whose tilt
position has to be determined precisely and set exactly via
connected PLC controllers and motors. Flawless function
in accordance with the specifications in the technical data
is ensured only when using original Balluff accessories, and
use of any other components will void the warranty.
Typical applications are, for example, detecting the
inclination of operating tables, solar panels, and
excavators.
Modifications to the sensor or non-approved use are not
permitted and will result in loss of warranty and void any
liability claims against the manufacturer.
www.balluff.com
Safety Notes
Before commissioning, read the user's guide
carefully!
These sensors must not be used in applications
in which the safety of persons is dependent on
the function of the device (not a safety
component according to EU Machinery
Directive).
Installation and startup are to be performed by trained
technical personnel only.
The operator is responsible for ensuring that local safety
regulations are observed.
In particular, the operator must take measures to ensure
that a defect in the measuring system will not result in
hazards to persons or equipment.
If defects or non-clearable faults in the sensor occur, take it
out of service and secure against unauthorized use.
Properties
– 1-axial fluid inclination sensor
– Clockwise and counterclockwise measuring direction
– High measuring accuracy across the entire temperature
range and measuring range
– High repeat accuracy and precision
– Can be used anywhere on the planet, because the
measuring value is independent of the gravitational
acceleration value at the measuring location.
– Low lateral angle sensitivity of ±0.1° at a lateral tilt of
up to max. 30°
max. 30°
– Extended temperature range of –40 to 85 °C with
internal temperature compensation
– Extremely low temperature drift
– Compact, robust metal housing with IP67 degree of
protection for use in harsh conditions
english 1