Using Direct Access Buttons - Odys Slim5Z Manual Del Usuario

The flash is activated automatically when the light level is too low if
the flash is set to "Auto". When "Always on" is set the flash is used
for every shot. When "Off" is selected, the flash is deactivated.
The flash only works in single shot mode and self-timer mode.
It does not work in burst and video mode.
Please note that using the flash increases battery consumption.

5.2 Using direct access buttons

Selecting photography mode directly
In photography mode, you can access the "Single"
and "Sequence"
The corresponding symbol is displayed at the top left of the LCD.
Selecting the resolution directly
In photography mode, the OK button can be used to select the
resolution progressively. The current resolution is displayed at the
top left of the LCD.
Accessing the flash mode directly
You can set the flash to "Auto"
the right button
corresponding symbol is displayed on the LCD.
modes by pressing the left button
, "Always on"
in single shot and self-timer modes. The
, "SelfTimer"
repeatedly.
or "Off" by pressing
19